Installing Debian on the Thecus N2100 -- PART 2 -- Installing the Installer
Posted by coldtobi | 16 Feb, 2008, 20:03Unfortunately, the last time was very busy, so I simply did not find the time to continue with this HOW-TO. Well, it is still tight, but today I want spend some minutes in completing at least the second part. Before I go forward learning python as I might have use for it in the NAS project...
Just repeating my self, please note, that this VOIDS YOUR WARRANTY. So the usual disclaimer apply: You brick, you repair it. I do not recommend installing Linux on the box, if you are not sure you can handle it. Linux requires more hand-on than the GUI -- you won't have a GUI anyway -- but on the other side, it reveals the real power.Table of Contents
- Part 1: Get Prepared
- Part 2: Installing the Installer (this article)
- Part 3: Installing Debian I (start the installer and configure RAID)
- Part 4: Installing Debian II
- Part 5: Fine tuning after the installation
<—&mdash Showing ERROR? Click here!
Linux / Debian, Thecus N2100 | Comments (0) | Trackbacks (0)
Updated to lifetype 1.2.6
Posted by coldtobi | 16 Feb, 2008, 09:23I just updated to lifetype 1.2.6. And as far as I can see, some nasty bugs I was experiencing with the ModReWrite are gone too..
<—&mdash Showing ERROR? Click here!
