Installing Debian on the Thecus N2100 -- PART 3 -- Installing Debian

Posted by coldtobi | 19 Feb, 2008, 01:21

Unfortuantly, the last time was very busy, so I simply did not find the time to continue with this HOWTO. Well, it is still tight, but today I want spend some minutes in completing at least the second part. Before I go forward learning phyton as I might have use for it in the NAS project...

Just  repeating my self, please note, that this VOIDS YOUR WARRANTY. So the usual disclaimer apply: You brick, you repair it. I do not recommend installing linux on the box, if you are not sure you can handle it. Linux requires more hand-on than the GUI -- you won't have a GUI anyway -- but on the other side, it reveals the real power.

Table of Contens

  1. Part 1: Get Prepared
  2. Part 2: Installing the Installer
  3. Part 3: Installing Debian I  (start the installer and configure RAID) -- this article
  4. Part 4: Installing Debian II
  5. Part 5: Fine tuning after the installation

 

 (More)


<—&mdash Showing ERROR? Click here!


Linux / Debian, Thecus N2100 | Comments (2) | Trackbacks (0)